Non-Shrink Grout
High-Strength Cementitious Grout for Precision & Structural Applications
High Strength. Non-Shrink Performance. Reliable Grouting.
Product Description
What is Non-Shrink Grout?
Non-Shrink Grout is a high-performance cementitious grouting material designed for applications where high strength, effective load transfer and dimensional stability are essential.
Its non-shrink characteristics help minimize shrinkage after placement, supporting effective filling of gaps and voids between structural elements. The grout is suitable for applications requiring reliable contact between concrete foundations, base plates, machinery bases and other structural components.
Its flowable consistency also helps the grout reach confined and difficult-to-access spaces, making it suitable for a wide range of construction, industrial and structural grouting applications.
Is Conventional Grouting Affecting Your Installation?
- Shrinkage after grout placement
- Voids beneath base plates
- Incomplete filling of confined spaces
- Poor contact between structural components
- Difficult grouting around anchor bolts
- Uneven support beneath machinery
- Grouting areas requiring high strength
- Structural gaps requiring durable filling
Fill Voids. Support Loads. Strengthen the Installation.
Non-Shrink Grout is designed to fill gaps and voids while minimizing shrinkage after placement. Its cementitious and flowable characteristics make it suitable for precision applications where proper contact, structural support and effective load transfer are important.
Why Choose Non-Shrink Grout?
Available from Baral Chemical Company Ltd., a trusted Chemical Company serving Bangladesh’s construction sector, Non-Shrink Grout provides a professional solution for structural, industrial and general construction grouting applications.
For engineers, contractors and project professionals searching for the Best Chemical Company in Bangladesh for specialized construction solutions, Baral Chemical Company Ltd. offers a range of professional construction chemical products with technical support.
✅ Non-shrink performance
✅ High-strength cementitious grouting
✅ Good flowability
✅ Helps fill gaps and voids effectively
✅ Supports effective load transfer
✅ Suitable for precision grouting
✅ Suitable for confined areas
✅ Ideal for structural and industrial applications
✅ Supports durable installation and repair work
Where Can It Be Used?
- Machine Foundations
- Base Plate Grouting
- Anchor Bolt Grouting
- Steel Column Base Plates
- Precast Concrete Connections
- Structural Gaps & Voids
- Equipment Foundations
- Bearing Plates
- Industrial Machinery Installation
- Concrete Repair & Filling
- Structural Grouting
- General Construction Applications
Product Benefits
Key Advantages
HIND GROUT GP2 is a high-strength, free-flowing non-shrink cementitious grout designed for precise structural and machinery grouting applications.
01
Non-Shrink Performance
Designed to compensate for shrinkage and maintain effective contact within properly prepared grout spaces.
02
High Compressive Strength
Develops high early and ultimate strength for demanding structural and equipment grouting applications.
03
Free-Flowing
High-flow characteristics allow the grout to reach difficult spaces beneath base plates and equipment.
04
Chloride Free
Chloride-free formulation makes it suitable for use around steel and reinforced construction elements.
05
Rapid Strength Development
Designed to develop strength quickly where efficient project progress is required.
06
No Segregation or Bleeding
Properly mixed grout provides a stable consistency without undesirable segregation or bleeding.
07
Impact & Vibration Resistant
Suitable for machinery and equipment foundations exposed to operational vibration.
08
Easy to Use
Supplied as a ready powder system requiring only the recommended quantity of clean water.
Recommended Uses
Where Can Non-Shrink Grout Be Used?
Suitable for precision grouting where high strength, good flow and dimensional stability are required.
Base Plate Grouting
Suitable beneath machinery, equipment and structural base plates requiring full grout contact.
Bolt Pockets
Suitable for filling and grouting properly prepared bolt pockets in structural and industrial work.
Foundation Bolts
Recommended for foundation bolt grouting for machinery and industrial equipment.
Bridge Bearing Pads
Suitable for selected bridge and infrastructure bearing applications requiring high-strength grout.
Columns & Precast Work
Suitable for selected column connections and precast construction applications.
Industrial Machinery
Suitable for machinery foundations in cement, textile, paper and steel industries.
Application Process
Professional Grouting in 4 Steps
Correct surface preparation, water control, mixing and placement are essential for achieving reliable non-shrink grout performance.
01
Prepare the Area
Remove loose concrete, dust, oil, grease and contaminants from the grouting area. Ensure the substrate is sound and properly prepared.
02
Saturate the Surface
Saturate the grouting area with clean water. Before placement, remove any standing or stagnant water from the surface.
03
Mix the Grout
Add HIND GROUT GP2 powder to the recommended quantity of clean water and mix until a smooth, uniform consistency is obtained.
04
Place & Cure
Place the mixed grout continuously into the prepared space and begin curing after initial hardening. Keep the grout moist using damp hessian where required.
TDS Application Guide: Water-to-powder ratio is approximately 0.12–0.13 depending on required consistency. Mixed grout should preferably be placed within about 20 minutes at 30°C. After initial hardening, wet curing with damp hessian is recommended for approximately 3–7 days. :contentReference[oaicite:1]{index=1}
Performance Highlights
Engineered for High-Strength Grouting
55 N/mm² Approx. Compressive Strength at 7 Days
68 N/mm² Approx. Compressive Strength at 28 Days
0.1–0.5% Expansion
2200–2300 Density (kg/m³)
Product Information
Technical Data
Typical product information based on the HIND GROUT GP2 Technical Data Sheet.
| Product | HIND GROUT GP2 |
|---|---|
| Type | High-Strength Non-Shrink Cementitious Grout |
| Appearance | Grey Powder |
| Density | Approx. 2200–2300 kg/m³ |
| Expansion | Approx. 0.1–0.5% |
| 7-Day Compressive Strength | Approx. 55 N/mm² (Flowable) |
| 28-Day Compressive Strength | Approx. 68 N/mm² (Flowable) |
| 7-Day Flexural Strength | Approx. 7.6 N/mm² |
| 28-Day Flexural Strength | Approx. 9.5 N/mm² |
| Water / Powder Ratio | Approx. 0.12–0.13 |
| Approx. Yield | 25 kg yields approximately 12 L fluid grout or 11 L plastic grout |
| Maximum Base Plate Pour | Up to approximately 100 mm in a single pour |
Packaging & Shelf Life
HIND GROUT GP2 is supplied in a 25 kg poly-lined HDPE bag. Best-before period is approximately 6 months from the date of manufacture when stored unopened in a cool, dry covered place away from direct sunlight. :contentReference[oaicite:2]{index=2}
Product Price List
Choose Your Non-Shrink Grout Pack
Select HIND GROUT GP2 for your structural or machinery grouting requirement. Click Order Now to request current price, availability and technical guidance.
25 kg
HIND GROUT GP2
High-Strength Non-Shrink Cementitious Grout
- Base plate & bolt pocket grouting
- High-strength structural applications
Frequently Asked Questions
Non-Shrink Grout FAQs
Find answers about HIND GROUT GP2, mixing, placement, strength and suitable applications.
HIND GROUT GP2 is a high-strength, free-flowing, non-shrink and chloride-free cementitious grout designed for precision grouting under equipment,
base plates and structural components.
It can be used for base plate grouting,
bolt pockets, foundation bolts, machinery foundations,
bridge bearing pads, columns and selected precast
construction applications.
The TDS recommends a water-to-powder ratio of
approximately 0.12–0.13,
depending on the required consistency and site condition.
At approximately 30°C, the mixed grout should preferably
be placed within about 20 minutes to obtain the full benefit of its expansion properties.
The TDS reports approximately 55 N/mm² at 7 days and 68 N/mm² at 28 days for flowable grout under the stated test conditions.
After initial hardening, the grout should be kept
moist. The TDS recommends curing with damp hessian cloth for approximately 3–7 days.
Baral Chemical Company Ltd. provides professional construction chemical solutions
and technical guidance for structural, industrial and
repair applications. Customers searching for a reliable construction Chemical Company or the Best Chemical Company in Bangladesh can receive project-specific product guidance
and technical support.