High Strength Highly Liquefied Constructional Epoxy is applied for active anti-corrosive and anti-rust protection of iron and steel surfaces that are to be coated with epoxy systems. It is extremely hard and resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, to some solvents, water, sea water etc. Typical examples of use are the protection of silos, steel bridges, iron roofs, pipes, fences etc.
Its strongly recommended for any structural cracks, exposed iron & steel surface as anti-rust: exposed corroded & rusted reinforcement: floor surface.
High Strength Highly Liquefied Constructional Epoxy should be applied to the steel or rebar as soon as possible after the material is mixed and within its port life. In concrete repair situations ensure that the rebar is coated all around. If the coating is broken, re-apply a second coat after the first coat is dry (between 30 and 60 minutes). It is applied with brush, roller or spray gun. The second coat is applied once the first one is dry.