Pestonol
Professional Termite Control & Anti-Termite Treatment Service
Protect your property with reliable Pestonol anti-termite treatment for new and existing construction.
Protect your property with reliable Pestonol anti-termite treatment for new and existing construction.

Pestonol is a two-component termite controlling liquid formulated for effective termite prevention and pest control in both new and existing construction.
Supplied as Part-A and Part-B, it is mixed with water before application and helps control termite growth, penetration and attack, while also providing protection against cockroaches and other soil-dwelling insects.
Its non-volatile properties allow the treatment to remain in the soil, making it suitable for long-term protection around foundations and other vulnerable areas. Pestonol is commonly applied to ground floors, plinth areas and external trenches of buildings.
It is suitable for pre-construction soil treatment, external barrier treatment and termite control in existing buildings, offering a practical solution for both preventive and remedial applications.
Pestonol Termite Controlling Liquid is designed for effective termite prevention and pest control in new and existing construction, helping protect ground floors, plinth areas and building perimeters from termite attack.
Available from Baral Chemical Company Ltd., a trusted Construction Chemical Company, Pestonol provides a practical solution for termite prevention and pest control in both new and existing construction.
For contractors, engineers and property owners searching for a reliable chemical company in Bangladesh, Baral Chemical Company Ltd. provides professional anti-termite solutions with technical guidance and application support.
✅ Helps prevent termite growth and penetration
✅ Suitable for new and existing construction
✅ Effective for ground floor and plinth treatment
✅ Suitable for external trench and perimeter treatment
✅ Helps control cockroaches and other soil-dwelling insects
✅ Non-volatile performance in treated soil
✅ Easy application procedure
✅ Suitable for preventive and remedial treatment
✅ Technical guidance for mixing and dosage
✅ On-site technical support available for special applications
Pestonol is designed for termite prevention and pest control in both new and existing construction. It can be applied to ground floors, plinth areas, soil and external trenches to help prevent termite growth, penetration and attack.
Suitable for anti-termite treatment of compacted ground before soling and CC/RCC work.
Helps protect vulnerable plinth areas from termite penetration through the surrounding soil.
Applied around the building plinth to help create an external termite-control barrier.
Suitable for preventive termite treatment during the early stages of building construction.
Can be used for remedial termite treatment where termite or pest activity is already present.
Helps control termites, cockroaches and other soil-dwelling insects.
Helps prevent termite growth, penetration and attack.
Designed for application in soil around vulnerable building areas.
Provides non-volatile performance after application in treated soil.
Suitable for ground floors, plinth areas and external trenches.
Suitable for preventive and remedial termite treatment.
Designed with a practical mixing and application procedure.
Helps control termites, cockroaches and other soil-dwelling insects.
Guidance is available for mixing, dosage and correct application.
Prepare and compact the required soil or floor area before application.
Mix Pestonol Part-A and Part-B with the recommended quantity of water according to the treatment requirement.
Spray or spread the prepared Pestonol solution evenly over the required treatment area.
For new floor treatment, proceed with soling and subsequent CC/RCC work after application.
For special or critical applications, mixing ratios and dosage should be determined according to technical guidance.
After compacting the sand and before soling, apply Pestonol evenly over the floor area. The CC/RCC work can then be completed over the treated area.
For new construction, a trench approximately 2 ft wide and 2 ft deep is prepared around the building plinth. Pestonol is applied to the trench surface, followed by partial filling, re-application and final filling.
The treated surface can then be covered with brick soling, CC, tiles or approximately 2 inches of soil.
Recommended coverage stated in the TDS for new floor treatment.
Recommended coverage stated in the TDS for outside barrier treatment.
Contact the technical team for special or critical treatment requirements.
| Product Type | Two-Component Termite Controlling Liquid |
|---|---|
| Part-A Appearance | Milky White |
| Part-B Appearance | Crystal Green |
| Specific Gravity | 1.15 ± 0.02 (Approx.) |
| Suitable For | New & Existing Construction |
| Application Areas | Ground Floors, Plinth Areas & External Trenches |
Available in packaging including Part-A and Part-B.
Applies when stored under recommended conditions in original unopened packaging.
Store in a normal, dry place and keep out of reach of children.
Pestonol is stated as non-flammable in the technical data sheet.
Wear appropriate mask, goggles, gloves, helmet, shoes and apron during application.
If the material enters the mouth or eyes, rinse thoroughly with plenty of water.
Wash hands thoroughly with soap or detergent before eating.
Baral Chemical Company Ltd. provides technical support for correct dosage, chemical mixing and application methods. On-site technical assistance is also available on request to support proper product use.
Pestonol is a two-component termite controlling liquid used for termite prevention and pest control in both new and existing construction. It is commonly applied to ground floors, plinth areas and external trenches.
Yes. Pestonol can be used for pre-construction termite treatment. For new floor work, it is applied after sand compaction and before soling and subsequent CC/RCC work.
Yes. Pestonol can be used for remedial termite and pest-control treatment in existing buildings where termite activity is present.
For new construction, the recommended mixing ratio is 19 litres of water with 0.5 litre Pestonol Part-A and 0.5 litre Part-B. For old work, use 4 litres of water with 0.5 litre Part-A and 0.5 litre Part-B.
Yes. Baral Chemical Company Ltd. provides technical support for dosage, chemical mixing and application methods. On-site technical assistance is also available on request.