D-Water Sealer (Interior)
Acrylic Sealer for Interior Wall Protection
Resist Moisture. Control Efflorescence. Protect Your Paint.
Product Description
What is D-Water Sealer (Interior)?
D-Water Sealer (Interior) is a water-based acrylic polymer sealer formulated with excellent alkali and efflorescence resistance for interior surfaces.
It works as an effective primer for plastered walls, helping to seal the substrate and control moisture penetration from inside the wall while protecting the topcoat finish.
Its specially designed formulation provides excellent substrate penetration and topcoat adhesion, helping improve the durability and performance of the final paint system. D-Water Sealer (Interior) can be used on plastered walls, masonry, brick, fiber boards, asbestos cement and hardboards.
D-Water Sealer (Interior) — Seal the Surface. Protect the Finish.
Is Moisture & Efflorescence Affecting Your Interior Walls?
- Moisture penetrating through walls
- White salt or efflorescence deposits
- Paint deterioration
- Alkali-related surface problems
- Fungus and algae concerns
- Poor topcoat adhesion
- Problems on fresh plaster
- Reduced durability of wall paint
Seal the Wall. Protect Your Paint.
D-Water Sealer (Interior) creates a strong physical barrier against salt migration, fungus and algae, while providing excellent resistance against alkalinity and fresh-plaster efflorescence. Its strong substrate penetration and topcoat adhesion help create a suitable base for subsequent paint application and support longer-lasting interior wall finishes.
Why Choose D-Water Sealer (Interior)?
Available from Baral Chemical Company Ltd., a trusted Chemical Company serving Bangladesh’s construction industry, D-Water Sealer (Interior) combines surface sealing, efflorescence resistance and topcoat adhesion in one professional solution.
For customers searching for the Best Chemical Company in Bangladesh for specialized building protection products, Baral Chemical Company Ltd. provides professional construction chemical solutions with technical support.
✅ Excellent alkali resistance
✅ Excellent efflorescence resistance
✅ Excellent fresh-plaster efflorescence resistance
✅ Helps control moisture penetration
✅ Strong physical barrier against salt migration
✅ Helps protect against fungus and algae
✅ Excellent substrate penetration
✅ Improves topcoat adhesion
✅ Helps increase paint durability
✅ Fast drying and easy to apply
✅ Suitable for new walls and repainting
Where Can It Be Used?
- Interior Plastered Walls
- Masonry Surfaces
- Brick Surfaces
- Wall Substrates
- Fiber Boards
- Asbestos Cement
- Hardboards
- New Walls
- Repainting Projects
- Efflorescence-Affected Interior Surfaces
Key Advantages
Professional interior wall sealer designed to resist moisture, alkalinity and efflorescence while improving adhesion and durability of the finishing coat.
01
Efflorescence Resistance
Excellent resistance against fresh plaster efflorescence and salt-related surface problems.
02
Alkali Resistance
Provides excellent resistance against alkaline conditions commonly found in plastered walls.
03
Moisture Protection
Helps seal plastered surfaces and reduce moisture penetration from inside the wall.
04
Better Topcoat Adhesion
Provides good substrate penetration and supports strong bonding between primer and topcoat.
05
Salt Migration Barrier
Creates a physical barrier against salt migration, fungus and algae on suitable interior surfaces.
06
Fast Drying
Touch dry in approximately 15 minutes under suitable temperature and humidity conditions.
07
New & Repainted Walls
Suitable for both fresh wall preparation and interior repainting applications.
08
Improves Paint Durability
Helps protect the finishing coat and supports longer-lasting interior paint performance.
09
Easy Application
Water-based formulation suitable for convenient brush or roller application.
Recommended Application Areas
Interior Plastered Walls
Suitable as an interior primer and sealer before applying the finishing paint system.
Brick & Masonry
Can be applied to properly prepared brick and suitable masonry substrates.
Fiber & Hardboards
Suitable for approved fiber and hardboard surfaces requiring a water-based sealing primer.
New Walls & Repainting
Recommended for suitable new plaster surfaces as well as properly prepared repainting projects.
Application Procedure
Proper preparation is essential for better penetration, bonding and long-term paint performance.
01
Prepare Surface
Remove loose paint, powder, chalk, dust, fungus, algae and other foreign materials.
02
Repair Defects
Repair cracks and uneven areas with a suitable filler, then smooth the repaired area properly.
03
Apply Sealer
Apply D-Water Sealer Interior using a hair brush or roller on the prepared dry surface.
04
Dry & Recoat
Allow the applied sealer to dry properly. Minimum recoating time is approximately 2 hours, depending on temperature and humidity.
Application Note: The TDS allows dilution with water at approximately 2:1 ratio, but recommends using the product without dilution for best performance. Avoid application when wall moisture and alkalinity are high. The TDS recommends wall moisture below 20% and alkalinity below pH 9. :contentReference[oaicite:1]{index=1}
Technical Data
| Product | D-Water Sealer (Interior) |
|---|---|
| Paint Type | Water Based |
| Product Type | Interior |
| Finish | Mid Sheen |
| Binder | Acrylic Emulsion |
| Thinner | Water |
| Touch Dry | Approx. 15 Minutes |
| Hard Dry | Approx. 1 Hour |
| Recoating Time | Minimum 2 Hours |
| Dry Film Thickness | Approx. 30 µm per coat |
| Recommended Coats | 1 Coat |
| Application | Hair Brush / Roller |
Shelf Life & Cleaning
D-Water Sealer (Interior) has a stated shelf life of up to 24 months when stored in a tightly sealed container. Application tools should be cleaned with water immediately after use. :contentReference[oaicite:2]{index=2}
Product Price List
Choose Your D-Water Sealer Pack
Select a suitable pack for your interior project. Click Order Now to request current price, product availability and technical guidance.
0.91 Liter
D-Water Sealer
Interior Acrylic Wall Sealer & Primer
- Small interior wall areas
- Repair & repainting applications
3.64 Liters
D-Water Sealer
Interior Acrylic Wall Sealer & Primer
- Medium residential wall areas
- New plaster & repainting work
18 Liters
D-Water Sealer
Interior Acrylic Wall Sealer & Primer
- Large interior projects
- Residential & commercial applications
Frequently Asked Questions
D-Water Sealer (Interior) FAQs
Find answers about interior wall sealing, efflorescence resistance, application, drying time and product use.
D-Water Sealer (Interior) is a water-based
acrylic polymer sealer and primer from Baral Chemical Company Ltd. designed for suitable interior plastered walls
and other approved substrates.
Yes. The TDS describes D-Water Sealer Interior
as having excellent fresh plaster efflorescence and alkaline resistance,
helping protect the subsequent paint finish.
It can be used on suitable interior plastered walls, brick, masonry,
asbestos cement, fiber boards and hardboards.
It is intended for interior use only.
Apply the sealer to a properly prepared and dry
surface using a hair brush or roller.
The TDS allows dilution with water at approximately
2:1, although undiluted application is preferred
for better performance.
Under suitable conditions, the TDS states approximately 15 minutes touch dry, 1 hour hard dry, and a minimum 2-hour recoating time.
Actual drying time depends on temperature and humidity.
Yes. D-Water Sealer Interior is designed for suitable
new plaster and repainting applications. However,
the wall should be sufficiently dry before application.
The TDS recommends moisture below 20% and wall alkalinity below pH 9.
Baral Chemical Company Ltd. provides wall protection, waterproofing and
construction chemical solutions with technical
guidance for different projects. Customers searching for a reliable construction chemical company or the best chemical company in Bangladesh can receive product selection and project-specific
support from Baral Chemical Company Ltd.
Baral Rust Remover is a whitish color and water-soluble single component liquid chemical product. It is a breakthrough in the nonhazardous removal of unwanted rust. Rust Remover eliminates surface rust from iron and steel without harmful fumes. The product recommends rusted parts to soak overnight. The formula is non-toxic and biodegradable for easy disposal.